China Wholesale Microfibre Gym Towel - Custom Rubber & Plastic Injection Molding – Mingda factory and suppliers

Wholesale Microfibre Gym Towel - Custom Rubber & Plastic Injection Molding – Mingda

Short Description:

Product Detail

FAQ

Product Tags

Feedback (2)

During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of 70 grates, iron cast custom, forged flange stainless steel, Our goal is blazing new ground, Passing Value, in the potential, we sincerely invite you to mature up with us and create a vivid foreseeable future jointly!

Wholesale Microfibre Gym Towel - Custom Rubber & Plastic Injection Molding – Mingda Detail:

Basic Info

Casting Method: Special Casting

Surface Roughness: Ra3.2

Machining Tolerance: +/-0.01mm

Standard: ASME

Certification: SGS, ISO 9001:2008

Size: As Per Drawing

Additional Info

Packaging: standard export package

Productivity: 100 Ton/Month

Brand: Mingda

Transportation: Ocean,Land,Air

Place of Origin: China

Certificate: ISO9001

Port: Tianjin

Product Description

Injection molding is a manufacturing process accomplished by forcing raw, uncured rubber into a heated mold using a reciprocating screw. The material is formed and cured under heat and pressure, then removed to cool as a custom shape.

Compression molding uses a pre-measured amount of raw rubber material that is placed into a heated open lower mold cavity. The top cavity is then forced closed, causing the raw material to flow through the shape of the mold.

In transfer molding, rubber is measured, heated and forced into chamber. A plunger is used to force the material into the mold using a system of runners and channels to thoroughly fill the closed mold. The mold is heated to cure the raw material.

Molded Parts:

Rubber Gaskets
Rubber Door & Window Seals
Rubber Grommets
Rubber Bellows / Dust Covers
Vibration Dampening
Bump Stops / Screw Mounts

Materials:

Neoprene (CR)
Ethylene-Propylene (EPDM)
Nitrile (NBR)
Silicone (SI)
Styrene-Butadiene (SBR)
Natural Rubber (NR)

plastic

Custom Injection Molding8

plastic parts

Product detail pictures:

Related Product Guide:

Our enterprise insists all along the standard policy of product high-quality is base of business survival; client satisfaction could be the staring point and ending of an business; persistent improvement is eternal pursuit of staff as well as consistent purpose of reputation first, client first for Wholesale Microfibre Gym Towel - Custom Rubber & Plastic Injection Molding – Mingda , The product will supply to all over the world, such as: Durban, Sri Lanka, Korea, We always stick to the tenet of sincerity, high quality, high efficiency, innovation. With years of efforts, we have established friendly and stable business relationships with worldwide customers. We welcome any of your inquiries and concerns for our products, and we are sure that we will offer just what you want, as we always believe that your satisfaction is our success.

Microfiber Cleaning Rags

Microfiber Terry

A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.

By Lee from Chile - 2018.02.08 16:45

The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.

By Elva from Italy - 2017.11.29 11:09

Write your message here and send it to us