China Manufacturing Companies for Terry Velour Towels - Custom Rubber & Plastic Injection Molding – Mingda factory and suppliers

Manufacturing Companies for Terry Velour Towels - Custom Rubber & Plastic Injection Molding – Mingda

Short Description:

Product Detail

FAQ

Product Tags

Feedback (2)

Quality initially, Honesty as base, Sincere company and mutual profit is our idea, in order to create repeatedly and pursue the excellence for China Stainless Steel Channel and 316L Stainless Steel, Aluminium Machined Parts, Flat Face Weld Neck Flange, We promise to try our greatest to deliver you with high quality and economical products and services.

Manufacturing Companies for Terry Velour Towels - Custom Rubber & Plastic Injection Molding – Mingda Detail:

Basic Info

Casting Method: Special Casting

Surface Roughness: Ra3.2

Machining Tolerance: +/-0.01mm

Standard: ASME

Certification: SGS, ISO 9001:2008

Size: As Per Drawing

Additional Info

Packaging: standard export package

Productivity: 100 Ton/Month

Brand: Mingda

Transportation: Ocean,Land,Air

Place of Origin: China

Certificate: ISO9001

Port: Tianjin

Product Description

Injection molding is a manufacturing process accomplished by forcing raw, uncured rubber into a heated mold using a reciprocating screw. The material is formed and cured under heat and pressure, then removed to cool as a custom shape.

Compression molding uses a pre-measured amount of raw rubber material that is placed into a heated open lower mold cavity. The top cavity is then forced closed, causing the raw material to flow through the shape of the mold.

In transfer molding, rubber is measured, heated and forced into chamber. A plunger is used to force the material into the mold using a system of runners and channels to thoroughly fill the closed mold. The mold is heated to cure the raw material.

Molded Parts:

Rubber Gaskets
Rubber Door & Window Seals
Rubber Grommets
Rubber Bellows / Dust Covers
Vibration Dampening
Bump Stops / Screw Mounts

Materials:

Neoprene (CR)
Ethylene-Propylene (EPDM)
Nitrile (NBR)
Silicone (SI)
Styrene-Butadiene (SBR)
Natural Rubber (NR)

plastic

Custom Injection Molding8

plastic parts

Product detail pictures:

Related Product Guide:

Our group through specialist training. Skilled expert knowledge, sturdy sense of assistance, to fulfill the provider needs of shoppers for Manufacturing Companies for Terry Velour Towels - Custom Rubber & Plastic Injection Molding – Mingda , The product will supply to all over the world, such as: Libya, Munich, Cannes, So that you can utilize the resource from the expanding info in international trade, we welcome shoppers from everywhere on-line and offline. In spite of the good quality solutions we provide, effective and satisfying consultation service is supplied by our professional after-sale service team. Product lists and detailed parameters and any other info weil be sent to you timely for your inquiries. So you should make contact with us by sending us emails or call us if you have any questions about our corporation. ou may also get our address info from our web page and come to our company to get a field survey of our merchandise. We've been confident that we have been going to share mutual achievement and create strong co-operation relations with our companions in this marketplace. We're searching forward for your inquiries.

Microfiber Cleaning Rags

Microfiber Terry

The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.

By Adam from Ukraine - 2017.06.19 13:51

This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.

By Roberta from Malta - 2018.06.18 19:26

Write your message here and send it to us